How To Map Network Drive Windows 10

You can simply create a shortcut to a different drive or folder shared on your network by mapping that location. Once you Map Network Drive Windows 10, it will show up as a new drive under this pc in File explorer, therefore you can quickly access the shared files you need, just like you would your local disk drive.

Accessing files from your local hard drive is concerning the best thing you can do on your computer. Taking this to a different level and accessing files on hard drives on another system could be a bit additional difficult.

Mapping your location can imply that you just can produce a shortcut to a different drive or folder shared on your network. Doing this suggests that the Map Network Drive Windows 10 can show below "This PC" in file explorer.

What is a Drive

A drive in a computer is a location that stores information; this information is not removed easily. All drives in your computer store files and programs that may be used by the computer.

Types of Drivers

Local drive

A local drive is an internal or external drive that is directly connected to your computer. These drives, by default, can be accessed only by your computer.

Network drive

A network drive is the drive that can be accessed only over a network. This drive is available only by entering the network path.

Mapped drive

Map Network Drive Windows 10 that is allotted a drive letter. As an example, you can Map Network Drive Windows 10 to the D: drive in Windows. Having done this, after you look for offered drives, you’ll see the D: drive that looks like different drives on the computer. Opening the D: drive would enable you to access the network path.

How To Map Network Drive Windows 10

Step 1 :- Open File Explorer and select This PC.

Step 2 :- Click the Map network drive drop-down in the ribbon menu at the top, then select "Map network drive."

Step 3 :- Select the drive letter you want to use for the network folder, then hit Browse.

Step 4 :- If you receive an error message, then you will need to show on network discovery. To do so, open the control panel, select Network and Sharing Centre and select change advanced sharing settings from the top-left corner. From there, choose turn on network discovery. Save changes.

Step 5 :- Make sure your select and click on save. you can choose to reconnect to the folder every time you sign in therefore its always available. you can even use a unique user account to connect to the folder if required.

Step 6 :- Once you are done, you should see the new drive letter under This computer and can be able to access its contents like you would the other folder. If you want to disconnect the map network drive windows 10 right-click on it and choose Disconnect.

Map Network Drive Windows 10 : Command Prompt

You can achieve the same results you did with File Explorer using the command prompt. Just follow the next steps to map network drive windows 10 using your command prompt.

Step 1 :- Open the command prompt. You can do this simply by typing cmd and hitting the Enter key on the Run window.

Step 2 :- On your command prompt, type the following command:

net use x: \\computer name\sharename

Note that "x" represents the name you want to assign to the shared folder.

Step 3 :- You can slightly tweak the above command to insert some additional parameters. You can insert a different set of credentials using the following command:

net use x: \\computer name\sharename /user username password

Step 4 :- After restarting the computer, the drive will no longer exist. To avoid this and make the drive permanent, you can use the command:

net use x: \\computer name\sharename /P:Yes

Step 5 :- Using the command net use x: /delete will delete the mapped drive, while using the command net use * /delete will delete all mapped drives.

Turn on Network Discovery

Before we map network drive windows 10, we need to turn on the "Network Discovery" feature so that it can detect other computers in the network.

Step 1 :- Open Settings and navigate to "Network & Internet".

Step 2 :- Click on the Sharing Options.

Step 3 :- Under the "Network Discovery" section, select the "Turn on network discovery" option.

Step 4 :- Click "Save Changes."

How to Map a Network Drive in Windows 7

Map a network drive to get to it from Computer or Windows Explorer without having to look for it or type its network address each time.

Step 1 :- Open Computer by clicking the Start button and then clicking Computer.

Step 2 :- Click Map Network Drive.

Step 3 :- In the Drive list, click any available drive letter.

Step 4 :- In the Folder box, type the path of the folder or computer, or click Browse to find the folder or computer. To connect every time, you log on to your computer, select the Reconnect at logon check box.

Step 5 :- Click Finish.

Note :- If you can not connect to a map network drive windows 10 or folder, the computer you are trying to connect to might be turned off, or you might not have the correct permissions.

Disconnect a Map Network Drive Windows 10

Use these steps to disconnect a map network drive windows 10 :-

Step 1 :- Open File Explorer on Windows 10.

Step 2 :- Click on This PC form the left pane.

Step 3 :- Under the Network Locations section, right-click the network drive connected to Windows 10, and click the Disconnect option.

Quick tip :- Alternatively, you can select the map network drive windows 10, and on the "Computer" tab, click map network drive windows 10 sub-button and select Disconnect network drive.

After you complete the steps, the network drive will no longer be mounted on Windows 10.

Conclusion

Map Network Drive Windows 10 is really a basic method that you simply can realize very handy once sharing files on a network. No matter method you choose for to achieve this should depend on your personal preferences and what you find easier.

Thank you for reading this article. Do let me know for any queries in comment section below.